[DSO-TC3] FNIRSI Digital Oscilloscope Transistor Tester Signal Generator 3 in1 500Khz 10MSa/s Capacitor Resistor Diode 100K output

FNIRSI DSO-TC3 3-in-1 Handheld Digital Oscilloscope

Key Features

Oscilloscope:

• Sampling Rate: 10MSa/s
• Analog Bandwidth: 500kHz
• Input Resistance: 1MΩ

• Coupling Method: AC/DC

• Test Voltage Range: 400V

• Vertical Sensitivity: 10mV-10V

• Horizontal Time Base Range: 1us-10s

• Trigger Mode: Auto/Normal/Single

• Trigger Type: Rising edge/Falling edge

• Waveform Freeze: Yes
• Automatic Measurement: Yes

Transistor Tester:

• Triodes: β greater than 10 and less than 600
• Diodes: Forward voltage drop <4.5V
• Regulated Diodes: 0.01~32V
• MOSFETs: JFET, IGBT, MOSFET
• SCRs: Turn-on voltage <5V, gate Pole trigger current <6mA
• TRIACs: Turn-on voltage <5V, gate Pole trigger current <6mA
• Capacitors: 25pF~100mF
• Resistors: 0.01Ω~50MΩ
• Inductors: 10uH~1000mH
• Batteries: 0.1~4.5V
• Input Voltage: 0~40V

Signal Generator:

• Sine Wave: 1-100KHz/0-3.3V/50%

• Square Wave: 1-100KHz/3.3V/50%

• Pulse Wave: 1-100KHz/3.3V/0-100%

• Triangle Wave: 1-100KHz/0-3.3V/50%

• Ramp: 1-100KHz/0-3.3V/0-100%
• DC: 0-3.3V

Additional Features

• 2.4 Inch TFT Display
• Built-in Rechargeable Lithium Battery
• One-key AUTO for Easy Waveform Display
• Automatic Pin Definition and NEC Protocol Infrared Code Analysis
• Circuit Continuity Test
• PWM Output
• DS18B20 and DHT11 Sensor Measurements

✦ FNIRSI DSO-TC3 ingeniously integrates digital oscilloscope, electronic component tester, function signal generator and other functions into one. Equipped with 2.4 Inch TFT display. Built-in rechargeable lithium battery.

✦ DSO-TC3 handheld oscilloscope, 10 MS/s sampling rate, 500 kHz bandwidth. It can be used freely for both periodic analog signals and aperiodic digital signals. Equipped with one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.

✦ DSO-TC3 transistor tester can identify and measure various transistors, including NPN and PNP transistors, N-channel and P-channel field effect transistors etc. Automatic detection of pin definition. Automatically analyze NEC protocol infrared code.

✦ DSO-TC3 transistor tester is suitable for pairing of transistors, identification of mixed surface mount, and preliminary screening of small batch components. "Mos Test" mode can test various types of transistors and test capacitance, resistance etc.

✦ Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement.

✦ Six waveforms: sine, square, pulse stroke, triangle, ramp and DC.