Breathe New Life into Your iPhone Xs Max: Screen & Battery Replacement Guide

Is your trusty iPhone Xs Max showing signs of age? A cracked screen or a fading battery can leave you frustrated. But don't despair! With a little DIY spirit, you can revive your phone and save money on an upgrade. This guide will walk you through the process of replacing both the screen and battery on your iPhone Xs Max.

Before You Begin:

Safety First: Lithium-ion batteries can be dangerous if punctured. If you're not comfortable with the process, consider seeking professional repair services.
Gather your tools: You'll need a Pentalobe 0.8 screwdriver, a Tri-Point 0.6 screwdriver, a suction cup, prying tools (like guitar picks or a Safety Razor Blade), a spudger, and a magnetic project mat (recommended).
Order replacements: Get a high-quality replacement screen and battery from a reputable vendor like Polartech. Don't forget a PT-T13 tool kit if you don't have the necessary screwdrivers.

Conquer the Screen Replacement:

Heat things up: Use Magic Heating Pads to loosen the screen adhesive for easier removal.
Unscrew the Entrance: Remove the two Pentalobe screws at the phone's bottom.
Make an Opening: Use a suction cup or a Safety Razor Blade to create a small gap between the screen and the frame.
Slide and Separate: Insert a prying tool and carefully slide it around the screen's edge to cut through the adhesive.
Disconnect Carefully: Use the Tri-Point screwdriver to remove the cable cover screws. Disconnect the battery, touch, display, and earpiece cable connectors meticulously.
Screen Swap: Remove the old screen and transfer the earpiece cable to the new one (be very gentle, this cable is fragile).
Reassemble with Care: Reconnect the cables, secure the new screen with the screws, and ensure everything is properly seated.