How to Replace the iPhone 13 Pro Battery with a Genuine Apple Part – S

How to Replace the iPhone 13 Pro Battery with a Genuine Apple Part – Step-by-Step Guide
No More Error Messages, Battery Health Restored!

Replacing the battery in your iPhone can be a daunting task, especially with all the error messages and warnings you might encounter when using third-party batteries. However, with Apple’s recent move to allow third-party repairs and the option to purchase genuine Apple parts, replacing your iPhone 13 Pro battery has never been easier or more reliable. If you’ve been struggling with the “Important Battery Message” or have seen your battery health decline, this guide will walk you through the process of replacing the battery with an official Apple replacement, without any annoying error messages or warnings.

In this step-by-step tutorial, I’ll show you exactly how to remove the old battery and install a new, genuine Apple iPhone 13 Pro battery. The process is simple and straightforward, as long as you have the right tools and follow each step carefully.

Tools You’ll Need

Before we dive into the replacement process, it’s essential to have the correct tools. Here’s what you’ll need to get started:

1. Screwdrivers – A set of precision screwdrivers is essential for opening your iPhone.
2. Magnetic Project Mat – Use this to organize screws as you work.
3. Alcohol Adhesive Remover – This will help loosen the adhesive that holds the screen and battery in place.
4. Plastic Pry Tool – Helps separate the screen from the phone’s frame without causing damage.
5. Curved Tweezers – Useful for handling delicate internal components.
6. Flexible Stainless Steel Screen Removal Tool – Thin and flexible, it’s designed to help you pry the screen open without damaging it.
7. Magic Self-Heating Pads – These help soften the adhesive, making it easier to remove the screen.

Step 1: Prepare Your iPhone

Make sure your iPhone is running iOS 18.2 or higher. This ensures compatibility with the genuine Apple battery and avoids any software-related issues.
Begin by powering off your iPhone before starting the replacement.

Step 2: Remove the Screen

1. Unscrew the Bottom Screws: Remove the two screws securing the screen at the bottom of the device.
2. Heat the Screen: Apply the magic self-heating pads to the screen. Let it heat for a few minutes until the screen feels warm to the touch. This will soften the adhesive and make it easier to separate the screen from the frame.
3. Use the Screen Removal Tool: Insert the ultra-thin, flexible stainless steel screen removal tool into the gap between the screen and the frame. Slowly move it around the edges of the screen. Drip alcohol adhesive remover along the edges to help loosen the adhesive. Be patient and use gentle force, as the screen is delicate and expensive.
4. Pry the Screen Open: Once the adhesive has loosened, carefully insert a plastic pry tool and gently slide it along the screen’s edges to separate it from the body of the iPhone.

Step 3: Disconnect the Battery

With the screen removed, you’ll see the battery connector and other internal components.

1. Disconnect the Battery: The first thing to do is disconnect the battery from the motherboard. This step is crucial to ensure there is no power running through the device while you work.
2. Remove the Light-Sensitive Cable: Unscrew and disconnect the light-sensitive cable located at the top of the device, being careful not to touch the camera during this process.

Step 4: Remove the Old Battery

Now it’s time to remove the old battery.

1. Loosen the Battery: The battery is initially secured with adhesive strips, but due to the tight internal space, this may not always work smoothly. Drip some alcohol adhesive remover under the battery and gently pry it up with the plastic pry tool.
2. Remove the Battery: Once loosened, carefully lift the battery out of the phone.

Step 5: Install the New Battery

1. Prepare the New Battery: Take the new, genuine Apple battery and remove the protective film from the adhesive.
2. Position the Battery: Align the battery connector with the motherboard and press it gently into place.
3. Apply New Waterproof Adhesive: Stick a new waterproof adhesive gasket around the battery area to ensure the phone is sealed and protected from moisture.
4. Reattach the Screen: Carefully reattach the screen, making sure it aligns correctly with the frame.
5. Reconnect the Battery: Finally, reconnect the battery to the motherboard and secure the screen back into place.

Step 6: Final Software Steps

Now that the hardware is complete, it’s time to finalize the repair on the software side:

1. Go to Settings: After turning on your iPhone, go to Settings and check the battery information. You may see a message that the battery is "Uncertified," but don’t worry — this is common with third-party repairs.
2. Finish the Repair: To resolve this, look for the option “Finish your battery repair” in the settings. Select Restart & Finish Repair.
3. Confirm the Battery is Genuine: Once your phone restarts and reconnects to Wi-Fi, you should see a message confirming that the battery is a genuine Apple part, and the Important Battery Message will disappear.

Conclusion

Congratulations! You’ve successfully replaced the battery in your iPhone 13 Pro with a genuine Apple part, and you’ve cleared the annoying error messages and battery health warnings. By following this guide and using the proper tools, you can restore your device’s battery life and performance without the hassle of dealing with uncertified components.

If you enjoyed this tutorial, feel free to check out more of our repair guides and tech tips. Happy repairing!

Purchase Genuine Apple iPhone Battery：https://www.polartech.com.au/collections/self-service-repair-no-error-message